The Steep Sneak II is our low-top roofing tennis shoe: a lightweight, sneaker-style shoe on the same replaceable Peak Series pad as our shingle roofing boots. We recommend it for light-duty work such as roof inspections, insurance adjusting, gutter cleaning and holiday-light installs.
The upper combines synthetic leather and breathable mesh, and the replaceable pad attaches to the sole with industrial-strength Velcro®.
Note: Tennis shoes do not provide ankle support like our boots. Recommended for light duty only.
Before you go up
- Light duty only: as a low-top, the Steep Sneak II does not give the ankle support of our boots.
- We do not recommend any of our shingle roofing boots and shoes on a pitch over 12/12.
- Do not use on wet, oily or icy surfaces.
- The pads are made for shingle, plywood, wood shake, felt and slate, not metal. For steel roofs, use the magnetic Steel Walker II.
- Cougar Paws footwear is not a fall protection device. Always use appropriate fall protection.
- Cougar Paws Covers fit the Steep Sneak II and protect the pads while you walk the job site or a customer's home. They are for ground use only, so take them off before you climb.
The STEEP SNEAK II line comes with a more "true fit" feel. They will fit more snug than boots in our past lineups, if you wear a wide please order a size up.
We do not make a separate women's line, so we suggest women order two sizes down.
A pair weighs 3.4 lb.
What the Steep Sneak II is made for
Pick the Steep Sneak II for light-duty work rather than full days of roofing: roof inspections, insurance adjusting, gutter cleaning and holiday-light installs.
For full days of roofing on shingle, choose the 6-inch Performer roofing boot. For inspections and estimates with more ankle coverage, the Hi Top II uses the same pad in a high-top boot.
The pad that does the gripping
The Steep Sneak II grips with the Peak Series pad, the same replaceable pad used on the Performer and the Hi Top II. Replacement Peak Series pads are $31.95 a pair and swap in about a minute per shoe with no tools.
Check the pads daily and replace them when the pad wears to within 1/4 inch of the flex zone wear bars. Our guide to when to replace roofing boot pads shows what to look for.
Choosing between a roofing shoe and a boot? Our guide to roofing sneakers vs roofing boots walks through it by job.
Steep Sneak II FAQ
Clear answers to help you choose the right tool for the job.
Trusted by professionals since 1996
What does "recommended for light duty only" mean?
It refers to the type of work, not the pitch of the roof. The Steep Sneak II is made for lighter jobs such as roof inspections, insurance adjusting, gutter cleaning and holiday-light installs. As a low-top, it gives less ankle support than a boot, so for full days of roofing on shingle, choose the 6-inch Performer.
Are roofing tennis shoes better than regular sneakers on a roof?
A roofing tennis shoe like the Steep Sneak II grips with a soft, replaceable pad made for roofing surfaces such as shingle, while an everyday sneaker's sole is not made for loose granules on a slope. When the pad wears down, replacement pads are $31.95 a pair.
Which pads fit the Steep Sneak II?
The Steep Sneak II uses the Peak Series pad, the same replaceable pad as the Performer and the Hi Top II. Replacement pads are $31.95 a pair.
Do Cougar Paws Covers fit the Steep Sneak II?
Yes. Covers fit the Steep Sneak II and protect the pads while you walk the job site or a customer's home. They are for ground use only, so take them off before you climb.
Can you wear the Steep Sneak II on a metal or wet roof?
No. The pads are made for shingle, plywood, wood shake, felt and slate, not metal; for steel roofs, use the magnetic Steel Walker II. And we do not recommend Cougar Paws footwear on wet, oily or icy surfaces.